| 基本特性 FEATURES | 主要應用 APPLICATIONS |
| 易加工 Easy processing | 注塑成型 Injection molding 應用于汽車、電器、電動工具等行業。 Applied in industries such as automobiles, appliances, and electric tools. |
| 優良耐溫性 Excellent temperature resistance | |
| 優異的機械性能 Excellent mechanical properties |
| 性能 Properties | 測試標準 IS0 | 測試條件 Test Condition | 國際單位 Unit | 典型值[1] Typical Values |
| 物理性能 Physical Properties | ||||
| 密度 Density | 1183 | 23℃ | g/cm3 | 1.18 |
| 收縮率 Mold Shrinkage | 內部方法 | 3.00mm,干燥 | % | 0.4-0.6 |
| 熔融指數 MFR | 1133 | 250℃×5kg | g/10min | 38 |
| 機械性能 Mechanical Properties | ||||
| 拉伸強度 Tensile Strength | 527 | 50mm/min | MPa | 58 |
| 伸長率 Elongation at break | 527 | 10mm/min | % | 105 |
| 彎曲強度 Flexural Strength | 178 | 2mm/min | MPa | 91 |
| 彎曲模量 Flexural Modulus | 178 | 2mm/min | MPa | 2500 |
| 沖擊強度（缺口）IZOD Impact Strength | 180 | 23℃ | KJ/m2 | 44 |
| 熱學性能 Thermal Properties | ||||
| 熱變形溫度 HDT | 75-2 | 1.80MPa | ℃ | 95 |
| 可燃性 Flammability | ||||
| 阻燃性 Flammability | UL94 | 1.6mm | - | V0 |
[1]典型值是指實驗室平均數據，僅用于使用時的參考，不作為產品使用的標準。
Typical values is the average laboratory data, for use reference,only not as a product standards.
| 干燥溫度 Dry Temperature | 90℃ |
| 干燥時間 Dry Time | 2-4h |
| 注嘴溫度 Nozzle Temperature | 255-265℃ |
| 前段溫度 Front Temperature | 250-260℃ |
| 中段溫度 Middle Temperature | 245-255℃ |
| 后段溫度 Rear Temperature | 240-250℃ |
| 模具溫度 Mold Temperature | 50-90℃ |
以上數值僅供注塑機參考使用，可根據不同機型、不同模具以及產品要求，對上述參數做適當調整。
The above-mentioned data is for injection reference, should adjust according to the difference of the machines andmolds and the specific requirement of the products.
使用前應檢查其包裝在運輸過程中是否破損。物料應儲存在陰涼干燥處，一旦破袋使用結束，應將剩余物料密封保存。
Before use, the packaging should be checked for damage during transportation. Materials should be stored in a cool and dry place. Once the bag is broken and used, the remaining materials should be sealed and stored.
